Black Friday is 10 days and 20 hours away.See the price watchNew on the blog: UK Black Friday PC price check 2026: 22% of deals are real lows

Skip to content
All guides

Upgrading to 2.5GbE or 10GbE at Home: Cards, Cables and Switches

Find the bottleneck, then match cards, cables and a switch end to end.

Intermediate 2 min readBy Spencer BullockUpdated

Start with the bottleneck

A faster network only helps if something at each end can use it. A single hard drive reads at roughly the speed of gigabit. A NAS with several drives, an SSD pool or a fast workstation can use 2.5G or more. Every link in the path, both network cards, the cables and the switch, runs at the speed of the slowest one.

2.5GbE: the easy upgrade

2.5G runs over the Cat5e or Cat6 cable most homes already have, and many recent mini PCs, motherboards and NAS units have 2.5G ports built in. For machines without one, a PCIe or USB adapter adds it. It roughly doubles real-world file copies over gigabit, which is often all a spinning-disk NAS can supply. Browse network cards.

10GbE: copper or SFP+

  • 10GBASE-T copper uses ordinary RJ45 sockets. Cat6a carries it the full 100 metres; Cat6 manages shorter runs. It is convenient but runs hotter and uses more power per port.
  • SFP+ uses cages that take a direct attach copper (DAC) cable for short runs or a fibre module for long ones. It runs cooler and uses less power, and many server network cards are SFP+.

A common homelab pattern: 2.5G for most devices, plus one or two 10G links between the NAS, the server and the switch.

Cards and slots

10G network cards are usually PCIe x4 or x8. Check your board has a slot wired for it, and that the card has drivers for your operating system or hypervisor. Many retired server cards are cheap and well supported, but some run hot and expect airflow. See buying used server kit.

The switch

Choose a switch with enough ports at each speed: some multi-gig ports for the machines that need them and gigabit for everything else. Several affordable switches pair 2.5G ports with a couple of SFP+ uplinks. Our guide to choosing a homelab switch covers management, PoE and noise, and you can compare network switch prices by speed and ports.

Check it works

After the upgrade, confirm the link speed on both ends, then test with a tool such as iperf3 between two machines before blaming the disks. A cable that negotiates gigabit instead of 2.5G or 10G is the usual culprit: reseat it, then try a known good one.

Before you buy

  1. 1Find what limits your transfers today.
  2. 2Check every device's port speed and the cable runs.
  3. 3Pick copper or SFP+ for 10G links.
  4. 4Check slots and drivers for any new cards.
  5. 5Choose a switch with the right mix of port speeds.

Compare UK prices